Caring for Your Hardwood Floors Done Right

Are you in the market for new flooring?  Do you want to give your old flooring a little sprucing up?  As the trusted experts in floor care, we can help keep your hardwood floors looking beautiful!

Our Quick Shine® Hardwood Floor Luster can give your floors a gorgeous shine no matter what type of hardwood floors are in your home.  Squirt and spread…it really is that simple!

It is important to start with a clean, dry surface when applying Quick Shine® Hardwood Floor Luster.  Clean your floors using a microfiber mop pad dampened with plain, cool tap water and then let it dry before applying the Floor Luster.  You can also clean your floor with our Quick Shine® Hardwood Floor Cleaner using a white microfiber bonnet, a sponge mop, or microfiber applicator.

We do NOT recommend cleaning with oil soap, pine oil, orange oil, ammonia, vinegar or any other all-purpose cleaners as these cleaners can interfere with the film formation process of our Floor Luster by leaving sticky oily residue, detergent haze or an inadequate surface for maximum gloss.

Spread the Hardwood Floor Luster with a damp mop or microfiber pad that has been freshly rinsed with cool tap water and wrung out.  Never spread the Luster with the same applicator that you use to clean the floor as the residue from the cleaner and/or soil can cause hazing and streaking.  When applying, use broad even strokes.  Do not use a back-and-forth motion as this will also cause streaks or haziness.  It is also important to let it completely dry (45-60 minutes depending on humidity levels and temperatures) before applying subsequent coats and before allowing pets or foot traffic on the floor.  If you do not allow Quick Shine® Hardwood Floor Luster to completely cure it will show footprints and smudges.

Now let’s talk maintenance… You can maintain the shine by keeping your floors clean and free of dirt and dust.  It is recommended to frequently dry dust mop, and for a more thorough clean, use our Quick Shine® Hardwood Floor Cleaner with a microfiber pad.  It is not recommended to pour the cleaning solution directly onto the flooring surface that has been treated with our Luster, but rather dampen the mop pad with cleaning solution and then mop the floor.  It is also important to avoid using vinegar or ammonia solutions to clean your floors in the future, as they will reduce the shine over time and ammonia can actually remove the finish.  Many general purpose and floor cleaning brands look acceptable when they are wet but when dry create foot printing and haze issues due to residue that is left on the floor.  We always recommend to clean and maintain your floors with Quick Shine® Cleaners.

Quick Shine® Hardwood Floor Luster is very durable and long-lasting.  As a general rule-of-thumb, high traffic areas should be freshened with Quick Shine® Hardwood Floor Luster every 2-3 months, light traffic areas every 4-6 months.  You can even freshen just the high traffic lanes of the floor if you wish.

In today’s market, there are hundreds of options for hardwood floors.  Distressed Wide Planks, Red Oak, Reclaimed Wood, Brazilian Cherry…the list goes on.  Quick Shine® Hardwood Floor Luster will be there to give you that deep, rich protective glow every time!  Check out these fabulous hardwood flooring options from our friends at HGVT…

http://www.hgtv.com/design/decorating/design-101/10-stunning-hardwood-flooring-options-pictures

10 Comments

  • TC
    Posted June 4, 2020 at 5:11 pm | Permalink Reply »

    Are your “Hardwood Floor Cleaners” safe to use on oil or wax finished flooring? (ie: hardwood floors that are very, very old — +100 yrs) I can’t seem to find specific details like this on your site.

    • Steven Quick
      Posted June 9, 2020 at 11:13 am | Permalink Reply »

      Hi,

      Our Cleaners and Finishes are both water based. Our Cleaners can be used to clean the floors, however we recommend testing an area before you use our Finishes to assure the adhere properly over your older hardwood floors. For more information, please contact customer service at 800-255-1891. We are always happy to help!

  • Posted April 20, 2020 at 3:54 pm | Permalink Reply »

    We applied Holloway House Floor Luster on our 3 year old dark stained Hickory wood floors. We waited several hours to put the furniture back and allow our dog to walk on the floors.After one day, the finish is showing smudge marks, footprints and paw prints. How do we get rid of the smudge marks and footprints? Will this continue to happen to our floors if we continue to use tis product?

    • Steven Quick
      Posted April 22, 2020 at 2:20 pm | Permalink Reply »

      Hi Jan,

      Quick Shine is designed to be extremely durable and should not show smudge marks or foot traffic. It is possible the finish had not fully cured although it was dry and moisture had absorbed into the finish. You can spot treat the affected areas or remove the finish completely and start fresh with Quick Shine Deep Cleaner. Simply dilute our Deep Cleaner with hot water and apply to small sections at a time. Allow solution to sit for 3-4 minutes and mop or wipe away. Quick Shine Deep Cleaner is only available online at this time at http://www.quickshine.net or http://www.walmart.com. For more information, please contact customer service at 800-255-1891. We are always happy to help!

  • Judy
    Posted April 16, 2020 at 4:08 pm | Permalink Reply »

    Can I use Quick Shine to give a new matte finished floor a shiny look? I just installed Castlebury Cathedral Eurosawn white oak. I like it but my husband thinks its too dull.

    • Steven Quick
      Posted April 17, 2020 at 8:26 am | Permalink Reply »

      Hi Judy,

      Yes, Quick Shine is safe to apply on any hard surface flooring to enhance a beautiful protective shine. For application tips, please contact customer service at 800-255-1891. We are always happy to help!

  • Crystal
    Posted January 18, 2019 at 12:11 pm | Permalink Reply »

    Is it safe to use Holloway hardwood floor luster on water-based polyurethane maple wood floors?

    • Steven Quick
      Posted January 18, 2019 at 2:11 pm | Permalink Reply »

      Hi Crystal,

      Yes, you can apply our Quick Shine Finishes over a polyurethane finished floor. Our pH neutral formula cannot remove or affect a polyurethane finish. For more information, please contact customer service at 800-255-1891. We are always happy to help.

      • TAKISHA LINDSAY
        Posted January 25, 2020 at 12:40 pm | Permalink Reply »

        I applied lemon oil directly to my hardwood floors, how long does it take to dry. The floors are shiny and slippery.

        • Steven Quick
          Posted January 30, 2020 at 4:15 pm | Permalink Reply »

          Hi Takisha,

          It is not recommended to apply Lemon Oil to floors. If you floors are sealed, the Lemon Oil will not dry. You will need to wipe and rinse away the Lemon Oil. We recommend using Quick Shine Floor Finish for floors. For more information, please visit our website or contact customer service at 800-255-1891. We are always happy to help!

Post a Comment

Your email is kept private. Required fields are marked *