Go-To Guide: Finish and Maintain

Whether you have kids at home or just love to entertain, keeping your floors tidy and clean can be a real challenge.  Quick Shine® Floor Finish is the perfect choice to shine and protect your floors against foot traffic and prevent them from looking dull or worn.  Our quick and easy application transforms any room within minutes.  Below is a quick go-to guide on finishing and maintaining your floors to WOW your guests of all ages.


  • Dry dust mop prior to applying Quick Shine® Multi-Surface Finish or Hardwood Luster Finish to remove any dust/debris from your floors.
  • After floor is free of debris, pet hair and dust squirt Finish in an S-shape onto floor.
  • Using broad even strokes spread the finish with a damp microfiber mop or sponge mop working in small 5 by 5 foot sections at a time
  • Dries to a gloss in 30 minutes
  • After floor is completely dry additional coats can be applied using the same method as above if a higher gloss is desired


  • Keep the finish glow fresh by dry dusting weekly with a dry microfiber mop to eliminate everyday dust and debris.
  • For heavier dirt, footprints, spills or soil use Quick Shine® Cleaners to maintain the finish gloss.
  • Simply squirt onto floor in an S-shape and spread with a clean, freshly rinsed sponge mop or microfiber mop pad. It is important to wring the pad frequently in order to release the dirt from the pad to prevent streaking and hazing.
  • You can also use Quick Shine® Cleaners in our Quick Shine Spray Mop for a more convenient cleaning method. Again, rinse the mop pad frequently to prevent hazing and clouding.


  • Every 2-4 months reapply a fresh new coat of Quick Shine® Multi-Surface or Hardwood Finish to enhance the glow.
  • Each time you refresh repeat the “Maintain It” bullet points above for maximum gloss protection.


  • Establish floor mats or throw rugs at entryways and walkways to minimize the abrasion of the finish caused by dirt and grit tracking.
  • Place felt-tipped protectors on bottoms of chair and furniture legs.
  • Keep pet nails trimmed.
  • Try going shoe-less as sock traffic is better than shoe traffic.


  • Dana Holland
    Posted April 14, 2018 at 1:03 pm | Permalink Reply »

    I just used a small amount of your Quick Shine Multi Surface floor finish on a small area of my 25 year old Corian countertop, It now has a beautiful glossy shine and looks brand new. Is this okay to do? Im tempted to do all of the countertops but want to make sure it wont damage the corian. So far my test area looks fantastic. Please reply. Thanks!

    • Steven Quick
      Posted April 16, 2018 at 10:32 am | Permalink Reply »

      Hi Dana,

      Yes, many consumers have used our Quick Shine® Finish on a variety of sealed hard surfaces including cabinets, furniture and countertops. Quick Shine® Finish is a water-borne polymer formulation designed to protect and impart a rich, deep, protective glow to sealed surfaces. You can safely apply our Finish without damaging your Corian countertop. If you ever decide to remove our Finish, we recommend our Quick Shine® Deep Cleaner. If you have additional questions, please contact customer service at 800-255-1891. We are always happy to help!

Post a Comment

Your email is kept private. Required fields are marked *