Skip to main content
Free shipping on $50 minimum order

Quick Solution to Drips & Overspray

Accidents happen, am I right?  However, there is no need to worry in this situation.  We have a quick and simple solution for you!

If you get a wet ring on your table from the solution dripping down the side of the bottle, or get over-splash on your wall and/or appliances when applying the finish to your floor – don’t fret!

You can remove the Quick Shine® Multi-Surface Floor Finish or Quick Shine® High Traffic Hardwood Floor Luster from a variety of surfaces with WINDEX or FORMULA 409.  It’s that simple!  Apply either of these products directly onto the Quick Shine® splatter and leave it on for a minute or so, and then wipe it off with a damp cloth.  This method has worked for many of our consumers who needed to remove a small amount from appliances, countertops, or tables.  Ba-Da-Bing, Ba-Da-Boom!

 

15 Comments

  • Mayra Monterroso
    Posted 09/27/2018 at 11:59 pm

    I used over and over quick finish and now the floor looks stripped claudy how I can remove the old to apply again?

    Reply »
    • Steven Quick
      Posted 09/28/2018 at 4:15 pm

      Hi Mayra,

      We recommend our Quick Shine Deep Cleaner to safely remove our Finish if the shine has become compromised. Simply dilute our Deep Cleaner with HOT water and mop solution over affected area, let sit 2-3 minutes and mop away. Finish with a clean water rinse. Once the area is clean and dry, you can reapply a new coat of our Finish to even out the shine again. If you have additional questions, please contact 800-255-1891. We are always happy to help!

      Reply »
  • Michele Taylor
    Posted 01/16/2019 at 11:55 am

    my husband waxes my kitchen floors and always seems to spatter my stainless appliances with quick shine. we love the product but not on my appliances! I have quite a bit of buildup and how do I remove it. I’ve heard everything from acetone, vinegar, WD40, a hairdryer to melt it, 409, and on and on. Just do not know how to dissolve it! help.

    Reply »
    • Steven Quick
      Posted 01/17/2019 at 11:16 am

      Hi Michele,

      We recommend removing the splatters from your appliances with Formula 409 or Windex with ammonia. Spray either solution on the splatter and let sit for 1 minute before wiping away. This method has worked well for many consumers.

      Reply »
    • Davida Packer
      Posted 05/31/2020 at 5:57 pm

      How often spouse you use the quick shine multi floor shine or lusters versus the cleaners

      Reply »
      • Davida Packer
        Posted 05/31/2020 at 5:57 pm

        * should you use

        Reply »
        • Paula Fedewa
          Posted 11/03/2020 at 9:59 am

          I use Halloway House polish on my engineered hardwood floors and have for years. How do I safely remove the buildup as it has worn off in places and I want to start over?

          Reply »
          • Steven Quick
            Posted 11/03/2020 at 10:04 am

            Hi Paula,

            We recommend removing our Finish from your engineered hardwood floors with Quick Shine Deep Cleaner. This product was formulated to remove our Finish without affecting the original factory finish. This product is available online at http://www.walmart.com or on our website. Simply apply the Deep Cleaner and let sit for 2-3 minutes, then mop away the solution. You should be able to see if the residue is off of the floor. Finish with a clean water rinse to bring your floors back to their original condition. For additional assistance please contact customer service at 800-255-1891. We are always happy to help!

      • Steven Quick
        Posted 06/01/2020 at 10:50 am

        The general rule of thumb is to only apply Quick Shine Floor Finish or Luster every 2-6 months when needed. Our cleaners can be used weekly to maintain the shine. For more information, please contact customer service at 800-255-1891.

        Reply »
  • Pat Maginnis
    Posted 03/01/2019 at 5:14 pm

    Can I used quick shine deep cleaner on my painted metal door which has become splashed with quick shine although no the bottom where it meets the floor? Neither 409 nor windex took it off .

    Reply »
    • Steven Quick
      Posted 03/04/2019 at 10:58 am

      Hi Pat,

      Yes, our Quick Shine Deep Cleaner will remove the over spray from your door. You will want to gently wipe away the Finish after the Deep Cleaner has sat for a minute on the surface to avoid scrubbing the paint away. For additional questions, please contact customer service at 800-255-1891. We are always happy to help!

      Reply »
  • Posted 06/14/2019 at 5:39 pm

    I accidentally drop quick shine on my walls how can I remove it ?

    Reply »
    • Steven Quick
      Posted 06/17/2019 at 9:09 am

      Hi Carlos,

      You can remove the Quick Shine Floor Finish from a variety of surfaces with WINDEX or FORMULA 409. Apply either of these products directly onto the Quick Shine splatter and leave it on for a minute or so, and then wipe it off with a damp cloth. This method has worked for many of our consumers who needed to remove a small amount from stainless steel appliances, countertops, walls or tables.
      If you have further questions, please call our Customer Service Center M-F at-1-800-255-1891 from 8am to 4:30pm EST. We are always happy to help!

      Reply »
  • Geri
    Posted 01/22/2022 at 9:07 pm

    My maid got the quick shine on my new wood cabinet door. Can I remove the splatter without hurting the cabinets finish?

    Reply »
    • Steven Quick
      Posted 01/24/2022 at 8:40 am

      Hi Geri,
      Yes, we recommend spraying Windex or Formula 409 directly on the splatter. Allow to sit 30 seconds and wipe with a clean damp cloth. This method has worked for other consumers with similar issues.

      Reply »

Post a Comment

Your email is kept private. Required fields are marked *