Skip to main content

How to Use Our Quick Shine® Deep Cleaner

Deep Cleaner to the rescue!  Many of you have asked if there are any tips or tricks to the Deep Cleaner process so you can reapply the Quick Shine® Floor Finish to get your floors back to that WOW factor.

Today, we are happy to share with you the recommended steps below to give you confidence in conquering your floors like superman!  The Quick Shine® Deep Clean Kit comes with a microfiber scrubber pad and a 16 oz. bottle of the Deep Cleaner.  The microfiber scrubber pad is absolutely amazing and highly recommended to use during this process!

deep-clean-kit

The Quick Shine® Deep Cleaner was specifically developed to not only deep clean, but also to safely remove our finish from your floors.  Quick Shine® Deep Cleaner/Wax Remover will also remove other waxes and finishes without harming hardwood floors or their polyurethane seal or any other type of hard floor surface.  Below are 6 quick tips on how to use our Deep Cleaner:

  1. In a bucket, dilute the Deep Cleaner in HOT water as HOT water is more effective.
  2. Using a sponge mop or our Hardwood Floor Mop, apply to the floor surface. Do small sections (5’x5’) of the floor at a time in order to maintain a more manageable removal and clean-up.
  3. Allow the Deep Cleaner solution to remain on the floor for a few minutes. CAUTION:  Do not allow the solution to dry and re-adhere to the surface.  If solution appears to be drying, add a little warm water to keep the surface wet.
  4. The Quick Shine Floor Finish that you are removing should start to turn to a milky white film indicating the finish is being removed.
  5. After a few minutes, agitate with our microfiber scrubber pad. Aggressive agitation and elbow grease are typically required to remove ground-in dirt and multiple layers of the finish.
  6. Once you have removed the floor finish, rinse the area with clear, warm water and allow to dry. Then you can proceed to the next 5’x5’ area and repeat steps 1-6.

NOTE:  For heavy build-up, you may need to use a second treatment and/or you can also increase the dilution from 1 cup per gallon to 2-3 cups per gallon.  Deep Cleaner is concentrated, therefore it makes 3.5 gallons (at 1 cup per gallon), which should be enough for 500 square feet.

After completing this process, once your floors have completely dried you can now reapply a coat of our Quick Shine® Floor Finish or Quick Shine® Hardwood Floor Luster to bring your floors back to life giving them the shine they deserve!

We hope these simple steps have helped you with using the Deep Cleaner correctly and efficiently.  Now you can proudly wear that S on your chest and have triumph for your floors!

superman-chest1

If you have further questions please do not hesitate to leave a comment below, email, or call us at 1-800-255-1891.  We are always here to help!

 

12 Comments

  • Brandy
    Posted August 10, 2017 at 10:21 am

    How do you remove quick shi e floor finish frat has dried on the microfiber pad?

    Reply »
    • Steven Quick
      Posted August 10, 2017 at 2:21 pm

      Hi Brandy! You can soak the pad in a mixture of ammonia and water for about 1-2 hours. We recommend doing a half and half ratio. The ammonia should help emulsify any Floor Finish still in your microfiber pad. To prevent this from happening in the future, we recommend to rinse out the pad with HOT tap water immediately after applying the Floor Finish. Thank you!

      Reply »
  • Judy
    Posted August 9, 2017 at 2:17 pm

    Will this product work on a wood surface? The Quick Shine bottle left a ring on my wood nightstand.

    Reply »
    • Steven Quick
      Posted August 9, 2017 at 3:28 pm

      Hi Judy! Yes, you can use our Deep Cleaner to remove that. You can also use WINDEX or FORMULA 409 to remove small areas of the Finish as in your situation. Apply either of these products directly onto the Quick Shine splatter and leave it on for a minute or so, and then wipe it off with a damp cloth. This method has worked for many of our consumers who needed to remove a small amount from stainless steel appliances, countertops or tables. Thank you!

      Reply »
  • Lizzie
    Posted August 8, 2017 at 11:48 am

    What about using it on a stone/ceramic tile bathroom floor? It said quick shine can be used to shine these floors but the floor has looked uneven and peely and I’ve been trying hard to remove it. Wanting to buy this product to do so, but will it also work on this type of floor?

    Reply »
    • Steven Quick
      Posted August 9, 2017 at 10:00 am

      Hi Lizzie,

      Yes, our Quick Shine Deep Cleaner will safely remove our Finish from your tile floors. This product was specifically developed to remove polymer and wax finishes without harming hardwood floors or other types of hard surface floors such as tile, vinyl, stone, marble, and laminate.

      Simply dilute the Deep Cleaner in HOT water and apply to the floor surface, let stand for a few minutes and agitate. Do small sections of the floor at a time. Then remove debris and build-up from the floor with a clear water rinse. For heavy buildup, you may need to increase the dilution of 1 cup per gallon to 3 cups per gallon. Deep Cleaner is concentrated, therefore one 27 oz. bottle will make roughly 2 gallons, which covers about 500 square feet and will not damage the sealant on hardwood floors. The Quick Shine Deep Cleaner is only available online at http://www.quickshine.net or by calling our Customer Service Center.

      After using our Deep Cleaner, apply two or three coats of Quick Shine Floor Finish once each coat of finish has completely dried. You will be amazed at the deep, rich, even, protective glow. You will not need to go through the removing process again if applied and maintained correctly.

      If you need further assistance please contact customer service at 800-255-1891. Thank you again for being a great customer!

      Reply »
  • Niki
    Posted July 15, 2017 at 9:03 am

    How do you remove Quick Shine Floor Finish that dripped off the bottle onto a sink top?

    Reply »
    • Steven Quick
      Posted July 17, 2017 at 9:05 am

      Hi Niki! You can remove the Quick Shine Floor Finish from a variety of surfaces with Windex or Formula 409. Apply either of these products directly onto the Quick Shine splatter and leave it on for a minute or so, and then wipe it off with a damp cloth. This method has worked for many of our consumers who needed to remove a small amount from stainless steel appliances, countertops, or tables. If you have further questions, please feel free call our Customer Service Center M-F at-1-800-255-1891 from 8am-4:30pm EST. Thank you for being a great customer!

      Reply »
  • SHIRLEY SCALLEY
    Posted July 8, 2017 at 5:16 pm

    i can’t remove smudges left by quick shine deep cleanerl

    Reply »
    • Steven Quick
      Posted July 10, 2017 at 9:36 am

      Hi Shirley! That indicates there is still a little bit of finish remaining on the floor and will need a second application of the Deep Cleaner to remove completely. If you have any further questions, please feel free to call our Customer Service M-F at 1-800-255-1891 from 8am-4:30pm EST. Thank you for being a great customer!

      Reply »
      • John Thomas
        Posted April 3, 2019 at 9:43 am

        Is this a product that can be high speed buffed? Also, what process do you recommend to maintain floors on a quarterly basis?

        Reply »
        • Steven Quick
          Posted April 3, 2019 at 12:45 pm

          Hi John,

          Our Quick Shine Deep Cleaner is a solution that you mop on and allow to sit for a few minutes before mopping back off to remove layers of our Quick Shine Finish. Contractors have often used a buffer machine to speed up the removal process, however a simple mop and bucket is all that is required. For best results, you may start with a mop, allow solution to sit for 2-3 minutes and buff away. For more information, please contact customer service at 800-255-1891. We are always happy to help!

          Reply »

Post a Comment

Your email is kept private. Required fields are marked *